Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I was told you can not use the "log" option on a DACL so I'm wondering how you fine-tune your DACLs? I don't want to put a deny ip any any and have no way of knowing what ports are being blocked.
We are using IP SLA with our SilverPeak devices. We use the verify-availability to make sure traffic is not black-holed. The problem arises with 2 offices that do not support this command. (I'm not sure why this one command is not available but it...
We have noticed that when we place 8861 phones behind a VPN router the phones can no longer download templates or changes. They work just fine otherwise. It does not appear to be a port blocking issue so we are wondering if it might be related to ...
We have 3 admins that have been using ASDM 6.25 just fine with all ASAs on version 8.0(519) and now I have a new admin that just tried to download ASDM 6.25 and he is receiving the error above. He is running the same OS and Java version as the rest ...
We had problems with Win10 as well. In our existing 802.1x for Win7 we are using MSChap and authenticate against user cert and AD, however, with Win10 that did not work. We had to change the supplicant to use EAP-TLS and only check machine cert.
Thank you for this information. I'll read through the document and try that out. Our test environment was setup but the DACLs had permit ip any any at the end so we could get it all running. Now we want to fine-tune and lock it down before we go i...
It is very disappointing as we have no other option in those locations. If I can't find a way to make this work then we will not be able to use WAN Acceleration in those offices and we really need it. I'm not sure why they would have some portion o...
So in all but these 2 locations we have 6509E as our backbones running IPServices. In these locations (due to the size) we are using 4510R+E with EntServices as the backbones. TAC said you can't run this command on a 4500.
