When I've reviewed the CER documentation before, it has appeared to require a "sweep" of the network to update ERL for phones, which might be done once or twice a day. I don't know if I could remember exactly how it figures out the ERL of each phone,...
Customer wants a “virtual” 3MB pipe on two locations, The Tasman 1004 box specified can support and bond up to 4 T1s. Customer has several internal networks that they need to supply IP bandwidth to, and they want to make sure that they are not wasti...
Here's my question (although I think I already know the answer).Client wants to install a centralized CCM & Unity platform to support 10 IP phones at a campus facility other than the data center.The client has all Alcatel switches & routers. The camo...
I was advised of an application that is for broadcast quality video leaving the US bound for Canada.They have OC-48 hubs around the US in NYC, Seattle, LA and maybe Chicago.They need to equip the Hubs with L2 & L3 devices. What Cisco device would one...
It's my 1st crack at configuring one of these so, what would be suggested for the following application?One pair of Cisco 15454’s -Fiber Type 2 Leaf Fibers Single mode - OC12 backbone with provisioning for: OC3, DS3, EtherNet 10/100 meg, GigE, DS1
Jason, thank you so much. It is basically what I thought may be (some ) of the answers. I'll take your recommendations and approach the customer again.thanks again,Dave
Michael, Thanks for all the input. I effectively think this will at least help me configure the device correctly. I am still awaiting answers from my customer.I will read the doc you recommended.Thanks again,Dave
Michael, Thanks for getting back to me, Basically, I'mlooking for which cards to order. The customer, will probably be configuring the boxes.I do appreciate the info, and am tryiing to get more info from the customer.Thanks,Dave
