Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi
I have 2 servers connected to 2 different leaf switches. I am trying to make them ping to each others via VXLAN fabric. Somehow, it didn't works.
Could anyone review the configuration of leaf switches?
Attached the topology and configs.
Hi,
I was trying to delpoy Nexus Dashboard cluster with 3 nodes (physical appliances - C225M6).
The data interfaces are connected to layer switch. The switch ports are configured as access port with VLAN 10. For some reason, i cannot ping to the da...
Hi
I've change the outgoing interface from TenGigabitEthernet2/4 to interface vlan 222. Since then, the IPTV is not working.
output of sh ip mroute 239.192.1.2 before change
(*, 239.192.1.2), 15w6d/00:03:19, RP 10.10.10.10, flags: SIncoming interfa...
HI,
I've upgraded new image to Cisco 9200. I have verified the version after the upgrade and confirmed the upgrade was successful.
After 2 days, the switch rebooted itself and reverted back to previous version. I suspected i didn't commit after the...
Hi,
I need to replace WS-X45-SUP7-E with WS-X45-SUP8-E in C4507. There is only a single sup in C4507. I wanted to minimise the downtime. I was thinking if i could slot it the WS-X45-SUP8-E in slot 4 and failover to become active.
Is that possibl...
Here is the output from leaf 1
Site1-L1# sh ip route ospf | in 10.3.0.210.3.0.2/32, ubest/mbest: 2/0 ==> Leaf 2 lo1
Site1-L1# show bgp l2vpn evpn summaryBGP summary information for VRF default, address family L2VPN EVPNBGP router identifier 10.2.0...
# This is for NOVAiso rp 0 0 rp_base cat3k_caa-rpbase.16.12.08.SPA.pkgiso rp 0 0 rp_core cat3k_caa-rpcore.16.12.08.SPA.pkgiso rp 0 0 rp_daemons cat3k_caa-rpcore.16.12.08.SPA.pkgiso rp 0 0 rp_iosd cat3k_caa-rpcore.16.12.08.SPA.pkgiso rp 0 0 rp_webui c...
