Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
This has to be something easy I'm missing. I have a main site with a Cisco ASA 5520 and a remote site with a Cisco ASA 5506. I already have an ezvpn site to site set up with several vlans added. I just tried to add another one and can't get pings to ...
I recently switch from Site to Site EZVPN connection to a fiber connection for my remote site back to the home network and had some issues getting the route learned through EIGRP instead of that EZVPN site to site. Now that's all working, but now w...
Having the same issue as this question: https://supportforums.cisco.com/discussion/11001836/site-site-ipsec-vpn-problem-while-access-http-traffic
Using a 5506 set up with an EasyVPN site to site tunnel. I'm guessing it's an issue with something on th...
I have Cisco 3750X switch that we've used for a while. I've turned off telnet access but I can console and ssh into it just fine. Recently I've been asked to get the Web GUI accessible. I search on EE and found this question: Cisco 3750x Web interfac...
I have a Win 7 64 bit PC with a Win XP 32 bit VirtualBox VM. I'd like the Win 7 host to sit on one VLAN and the VM sit on another VLAN. The only thing I've found about VLAN tagging a VM is this post: https://forums.virtualbox.org/viewtopic.php?f=2&t=...
I tried removing and re-applying that nat statement, that didn't work. I tried pulling the 12.4.1.0 subnet out of the Internal_Networks and put it in it's own group, applied that to the device, that didn't work either.
Below is my nat entry on the Main ASA: nat (inside,outside) source static Internal_Networks Internal_Networks destination static remote_network_1 remote_network_1 no-proxy-arp route-lookup
Testing from another remote site that's been connected for a while, I can't ping back to a VPN address either but everything else works fine. I'm trying to devise a test to help me nail down what the issue is, i.e. use packet tracer with port 3389 si...
If I run a sh ip route on the remote site's switch I can see my computer on VPN's IP address. But I can't ping it. And when I try to run a traceroute it hits my home location's switch but then stops there.
