Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have two vlans seperated by a router and we want to configure wake on lan. The users are located on Vlan 40 and the Wake on Lan server is located on Vlan 50. We need the Wake on LAN server on Vlan 50 to be able to power on the users terminals o...
Hi Guys,We have 2 Virtual servers in – one is a Citrix server and the other is an Application server. The communication between these 2 servers is critical, as the application writes to the APP server. Now, we have been facing a latency on the serv...
Any idea why this is happening,the 10.120.0.117 is my core switch in my other end site.d:\>tracert 10.120.0.117Tracing route to wcrbdepjozrc054.crb.apmoller.net [10.120.0.117]over a maximum of 30 hops:1 <1 ms <1 ms <1 ms 10.91.170.52 <1 ms <1 ms <1 m...
we are planning to migrate 3 E1 circuits from our 6506 (running CATOS) to a new 2811. I have configured the router but have some questions regarding how I should set up the fax. I have attached 2 config files, one for our existing 2811 (bne-vg-2811)....
How to find the Gig port serial number in 3548 xl series switch. sh inventory command is not working in the switch.Can any one assist me to find out the Gig port serial number detail's with any other commands... !! ONLY IN CLI mode. ??Thanking you in...
HiEtherChannel technology is not dependent on any type of media—it can be used with Ethernet running on existing unshielded twisted pair (UTP) wiring, or single-mode and multimode fiber.the logical duplex and seep is to be identical in the channel...
for 2960 will support only 255 vlans in vtp client /server and transparent modes.Follow these guidelines when creating and modifying normal-range VLANs in your network:•The switch supports 255 VLANs in VTP client, server, and transparent modes.•Nor...
Hi,for an exam, one of the neighbor is down and there is no feasible successor in the topology table,the roter set a query to all its neighbors.if the router is having the 5 neighbors it is going to send the multicast message to query it's all the ne...
hitry to find out with external traceroute command.#traceroute ipTarget IP address: ------ (ip)Source address:Numeric display [n]:Timeout in seconds [3]:Probe count [3]:Minimum Time to Live [1]:Maximum Time to Live [30]:Port Number [33434]: _______...
HiCatalyst Express 500 series switches support only VTP transparent mode. There is currently no support for VTP client or VTP server mode. The user must manually configure all VLANs that are used on the switch.in 3560 create the vlan ma...
