About mastram4u

mastram4u · 12-15-2010

Hi All,I have configured summary-address on my ASBR in which BGP routes are being redistributed into ospf process 100.On ospf process 100, I have configured summary address 10.x.x.x.Does the summary-address look for the 10.x.x.x only from the redisti...

mastram4u · 07-09-2008

The scenario is we are using some Public AS number such as 30 on our private network. Now, we are connecting to our global netowrk via MPLS. AS number for the MPLS peering is 65123. The AS number that is to be seen in the MPLS cloud and at any other ...

mastram4u · 07-02-2008

I have a router which has OSPF area0 and and eBGP configured. I have the subnets such as 10.22.33.0/24 available through my OSPF and they are E2 / E1 routes. Also, I will be receiveing huge number of prefixes in 10.x.x.x range from the eBGP. I would ...

mastram4u · 03-10-2008

Can some one please guide me how to configure Aironet 1200 Wireless access points to use Safeword / RSA tokens?

mastram4u · 08-26-2007

We have a router which is configured with few site-to-site VPN tunnels. Recently we have got new IP block and wish to use it for the tunnel establishment. Is it possible to achieve this on the same router. That is, can I use two different IP addresse...

mastram4u · 12-17-2010

Victor,Now my understanding is clear. Thanks for the explanation.In the topology diagram, I had indicated few routes in the OSPF domain just to indicate that these routes exist even when the summary address is configured. I had considered the longest...

mastram4u · 12-16-2010

Thanks Joe / Lamav.Couple of points to add.I have shown only a part of the prefixes available on the routing tables to make the scenario simpleThe prefixes shown in the core are the ones available when the BGP peering is up. These prefixes are availa...

mastram4u · 12-15-2010

As per my understanding , OSPF will summarize even if one prefix in the range being summarized exists i.e. ( if the summary-address is 10.0.0.0/8, i will see this summary route even if I have one subnet in that range exists in its routing table). Is ...

mastram4u · 12-15-2010

Thanks.The issue i am facing is , when the BGP goes down, the summary route does not get removed from the routing table.I could see the BGP peers to be down, but on the OSPF process, i have multiple O E1 / O E2 / O IA routes in 10.x.x.x subnet in OSP...

mastram4u · 07-09-2008

Hi LR, There is one router with AS 30, peering with another router with AS 31 (customer router) (which are in our private WAN network). The MPLS router with AS 65123(on the CPE,managed by us) will peer with the provider CE(mananged by the provider in...

Member Since	‎12-08-2004 04:10 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	37
Total Helpful Votes Received	11

User Statistics

User Activity

What Routes does OSPF ASBR summarize

BGP AS path question

Route Summarization question

Wireless authentication using Safeword/RSA tokens

Site-to-Site VPN using two different source IP addresses on the same router

Re: What Routes does OSPF ASBR summarize

Re: What Routes does OSPF ASBR summarize

Re: What Routes does OSPF ASBR summarize

Re: What Routes does OSPF ASBR summarize

Re: BGP AS path question