Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Trying to upgrade image on SSL module, but there is not enough space on flash. How do you delete old image on SSL module to create more space for new image?
I have several host routes that I want to advertise from a specific subnet. I do not want to advertise the entire class B subnet or individual /24 subnets. Only want to advertise the specific host without adding the 'network 164.103.195.60 mask 255.2...
I have a traditional core/access switches connected, Catalyst 4506 with 802.1Q uplink trunks to two core 6504-E switches. Spanning-tree roots for VLAN's were on core switch with the active HSRP/SVI. Shutdown HSRP/SVI on the cores and moved the SVI to...
What is the command to increase the maximum amount of connections from an internal device, need to increase the amount of connections from a specific internal host.
Is it possible to delete the old image from flash via the maintenance partition? The version of code needed to support additional SHA-1 and SHA-2 certificates I believe... not 100% sure though.
Tom,My concern is that the L2 path is different than the L3 path and is adding additional L2 hops. L2 path would have the L2 traffic going up to the 6500 on the non-blocking L2 port, and returning back down that same L2 link to get to the L3 default...
tom,Thanks for the reply, but Im only concerned about the one VLAN/SVI. Clients are directly connected to the 4506 access switchports and they're in VLAN196. The spanning tree root is on the upstream core switch, but the SVI is on the local acess swi...
I have a performance issue with WCCP using Websense V100000 Content filters. Wehnever we increase the WCCP redirected traffic all Internet connectivity slows down extremely. Are there any WCCP tuining parameters? WCCP is enabled on a Catalyst 6509...
