Hi, I'm LeeUCS B200 M5 is:A network boot process is required to reinstall the OS.However, when booting after rebooting, the LSI MegaRAID status window appears, and after that, only the cursor flashes, but the bios entry screen does not appear.HA-0 Ci...
안녕. 이임박사
UCS B200 M5의 증상. OS 재설치를 위해서는 네트워크 부팅 과정이 필요합니다. 다만, 재부팅 후 부팅시 LSI MegaRAID 상태창이 나타나고 이후에는 커서만 깜빡일 뿐 바이오스 진입 화면은 뜨지 않는다.
HA-0 Cisco FlexStorage 12G SAS 4.250.01-5047
1 호스트 어댑터에서 발견된 Virtual Drie
BIOS에서 처리하는 가상 드라이브 1개
<Ctrl><R>을 눌러 Meg...
Hello! This time, the UCSM with firmware of 4.0(4b) and the server with firmware of 4.1 or higher will be newly installed.Previously, the firmware of the new server was adapted to the existing firmware by applying the firmware policy, but as it passe...
I've heard someone say while working on a recent project.The environment is a structure where ESXi is installed on the blade and connected with Fabric Interconnect and the upper switch. The person said that if servers communicate with each other in t...
Hi. @beveritt
Thank you. I have built CCHN for my client with this document.I am trying to upgrade to AOS 6.10, but the version UCSM 4.3.4a in HCL is Deferred Release.
The server supports 4.3.4a, but I am having trouble choosing the firmware.
Is the...
hiAs far as I know is Server tab -> Policies -> Host Firmware Packages -> add -> without the board controller checkservice profile(name) -> polices -> firmware polices -> save and userack polices check
@balaji.bandi My question is not exactly defined.It was a scenario when there were VMs in the host server of Blade 1 and Blade 2, and the VM of Blade 1 and VM of Blade 2 communicated. I was thinking that when VMs of each host server are registered i...
