Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi - I have a situation where I have to use EIGRP to advertise a /24 (1.1.1.0/24) out router A to the WAN while some specific devices on that network (1.1.1.123/32, 1.1.1.234/32) have to be advertised out router B to the same WAN. Any ideas on how to...
I have to change from EIGRP AS 1 to EIGRP AS 10. I figured that I'd simply create AS 10, wait for the routes to be advertised, and then turn off AS1. Therefore no outage to users and ensuring a seamless transition. Unfortunately, AS10 is not advertis...
I need to upgrade my SUP720's IOS, but can't find what version FPD my SPA needs for the new IOS version. Is there a chart somewhere? The "Hardware/Software Compatibility" tool isn't helping.Thanks,Bob
I realize that the VSS Channel/VSS Feature is not supported in the 6513, but is the VS-S720-10G-3CXLSup card supported. In addition, are FWSMs and IDS cards supported?Thanks,Bob
Our Data Center wants to consolodate its DLSw peer routers. The field routers are peering with 6 Data Center routers. Can we move the IPs (loopbacks) of the 6 routers to 2 Data Cneter routers? That way we won't have to reconfigure the field - just a ...
Very good! I found it in the topo table, which I overlooked previously. In the lab, I have both ASes. I deleted AS1 and there were no connection losses. Thanks.Bob
Rick, Thanks for the response.The reason we like GRE keeps is mostly to eliminate confusion regarding the up/down status of a tunnel and as a 'warm fuzzy' for the NCC operators. I was starting to come to the conclusion that the both timers should be ...
