cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1208
Views
0
Helpful
2
Replies

configuring SIP Trunk between Callmanager and Th3d Sip Gateway

HI,

I have the following problem:

I don't understand how I have to configure my callmanager 7.1.2 to comunicate and to register with a th3d Sip gateway.

The main problem is that th3d Sip gateway to have to register with my callmanager with username and password.

how I have to configure the callmanager and which are the configuration menu that I have to set up ?

Thanks a lot

Best regards

Carmine

2 Replies 2

Steven Holl
Cisco Employee
Cisco Employee

If a DN registration is required by the Th3d SIP gateway, then you need to place a SIP-to-SIP CUBE between CM and Th3d.  CM doesn't support SIP registration, but CUBE does under the sip-ua configuration.