Hi all,
i have an as5350 carrying voice traffic normally, but quite often, the E1s carrying traffic go down and come back itself again. The ios in it is a c5350-is-mz.123-6c.bin. On going through the log history, i got the following message:
00:15:39: %CONTROLLER-5-UPDOWN: Controller E1 3/7, changed state to down
00:15:40: %DSX1-3-FIRMWARE_RESTART: T1/E1 Firmware in slot 3 restarted
00:15:41: %TRUNK_CLOCK-6-BAD_CLOCKS: There are no good clocks in the system. Remain in H
OLDOVER mode
00:16:03: %TRUNK_CLOCK-6-TRUNK: Switching to the trunk clock on slot 3 port 2 priority 2
06
00:16:06: %CONTROLLER-5-LOOPSTATUS: Controller E1 3/0, LOCAL loopback release from user
command
00:16:06: %CONTROLLER-5-LOOPSTATUS: Controller E1 3/1, LOCAL loopback release from user
command
00:16:06: %CONTROLLER-5-LOOPSTATUS: Controller E1 3/2, LOCAL loopback release from user
command
00:16:06: %CONTROLLER-5-LOOPSTATUS: Controller E1 3/3, LOCAL loopback release from user
command
00:16:06: %CONTROLLER-5-LOOPSTATUS: Controller E1 3/4, LOCAL loopback release from user
command
00:16:06: %CONTROLLER-5-LOOPSTATUS: Controller E1 3/5, LOCAL loopback release from user
command
00:16:06: %CONTROLLER-5-LOOPSTATUS: Controller E1 3/6, LOCAL loopback release from user
command
00:16:06: %CONTROLLER-5-LOOPSTATUS: Controller E1 3/7, LOCAL loopback release from user
command
00:16:06: %CONTROLLER-5-LOOPSTATUS: Controller E1 3/0, LOCAL loopback release from user
command
00:16:06: %CONTROLLER-5-LOOPSTATUS: Controller E1 3/1, LOCAL loopback release from user
command
00:16:06: %CONTROLLER-5-LOOPSTATUS: Controller E1 3/2, LOCAL loopback release from user
command
00:16:06: %CONTROLLER-5-LOOPSTATUS: Controller E1 3/3, LOCAL loopback release from user
command
00:16:06: %CONTROLLER-5-LOOPSTATUS: Controller E1 3/4, LOCAL loopback release from user
command
00:16:06: %CONTROLLER-5-LOOPSTATUS: Controller E1 3/5, LOCAL loopback release from user
command
00:16:06: %CONTROLLER-5-LOOPSTATUS: Controller E1 3/6, LOCAL loopback release from user
command
00:16:06: %CONTROLLER-5-LOOPSTATUS: Controller E1 3/7, LOCAL loopback release from user
command
00:16:34: from Trunk(3): debug-cas is off
00:16:36: %CONTROLLER-5-UPDOWN: Controller E1 3/7, changed state to up
00:16:36: %CONTROLLER-5-UPDOWN: Controller E1 3/2, changed state to up
00:16:36: %CONTROLLER-5-UPDOWN: Controller E1 3/0, changed state to up
00:16:36: %CONTROLLER-5-UPDOWN: Controller E1 3/1, changed state to up
00:16:51: %CONTROLLER-5-UPDOWN: Controller E1 3/5, changed state to up
00:16:55: %CONTROLLER-5-UPDOWN: Controller E1 3/3, changed state to up
00:16:55: %CONTROLLER-5-UPDOWN: Controller E1 3/6, changed state to up
00:16:56: %CONTROLLER-5-UPDOWN: Controller E1 3/4, changed state to up
00:32:11: %ISDN-4-RLM_STATUS_CHANGE: ISDN SC Se3/0:15 SC: Status Changed to: Server Swit
ched.
00:50:56: %CONTROLLER-5-UPDOWN: Controller E1 3/4, changed state to down
00:50:58: %CONTROLLER-5-UPDOWN: Controller E1 3/6, changed state to down
00:51:02: %CONTROLLER-5-UPDOWN: Controller E1 3/3, changed state to down
00:51:02: %CONTROLLER-5-UPDOWN: Controller E1 3/7, changed state to down
00:51:10: %CONTROLLER-5-UPDOWN: Controller E1 3/1, changed state to down
00:51:14: %CONTROLLER-5-UPDOWN: Controller E1 3/5, changed state to down
00:51:27: %CONTROLLER-5-UPDOWN: Controller E1 3/2, changed state to down
00:56:39: %CONTROLLER-5-UPDOWN: Controller E1 3/3, changed state to up
00:56:40: %CONTROLLER-5-UPDOWN: Controller E1 3/6, changed state to up
00:56:42: %CONTROLLER-5-UPDOWN: Controller E1 3/1, changed state to up
00:56:44: %CONTROLLER-5-UPDOWN: Controller E1 3/5, changed state to up
00:56:51: %CONTROLLER-5-UPDOWN: Controller E1 3/7, changed state to up
00:56:52: %CONTROLLER-5-UPDOWN: Controller E1 3/4, changed state to up
00:56:57: %CONTROLLER-5-UPDOWN: Controller E1 3/2, changed state to up
