12-13-2005 03:35 AM
Anybody has experience with MD110 and Cisco integration using ISDN PRI Q-Sig... Have problems with "idle-busy" channels on MD110. It looks like PBX does not recognize disconnect signal coming from the router.
Tks
Brani
12-19-2005 07:22 AM
Hope the below pdf will help .
12-20-2005 07:07 AM
Tks man,
Gives me some ideas on where to turn next...
Having a bit 'o worry that problem comes dues to fact that we don't assign additional bw for signaling channel. Our calculus multiplies only B-channels ignoring D... Will test SIP d/p service too, instead of cisco..... maybe I get some additional savings there, any ideas maybe?
Thanks
Brani
12-20-2005 02:42 AM
Hi,
Have you solved your problem?
If not post BC version, RODAP,ROCAP,RODDP.
IOS Version and config.
Regards,
MC
12-20-2005 06:59 AM
MC,
*************************************
Ericsson MD110, BC12 SP7
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
175 0110017500000010 5 3110000000 0 30 128 00080812 511110120031 111111
157 0110017500000010 5 3110000000 0 30 128 00080812 511110120031 111111
END
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
175 SL60 H'00000310 H'15420000 H'46300000 NO
157 SL60 H'00000310 H'15420000 H'46300000 NO
END
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
175 175 1606100000000250006000000 0 1 0
157 1 2606100000000250006000000 0 1 0
END
***************************************
Cisco IOS 12.3-3 (c2600-jsx-mz.123-3.bin)
Cisco config attached.....
Our serial links are satellite based so min delay is about 500ms
Tks
Brani
12-20-2005 03:19 PM
Hi,
I have a BC12 SP3 working:
Rodap:rou=201;
201 SL60 H'00000310 H'368600C2 H'46B80000 NO
Rocap:rou=201;
200 7110000000000010 6 3110000017 0 30 128 00151515 311110000031 111101
roddp:dest=91
94 201 1606100000000250106001100 0 1 0
My IOS image :c3825-ipvoice-mz.123-11.T7.bin
Try to create a route like this in Md110.
Regards,
MC
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide