I have a remote office w/ 2 local analog lines that have a 2620 router setup in SRST mode w/ a VIC-2FXO-M1
Everything works fine, expect Caller ID. I am using MGCP - not sure if that is a problem or not.
Here is my port config and the router debug info. The router is receiving CID, but not re-distributing it to the phone. Which also makes me think that Call Manager version might be a problem? v 3.1(4b)
Voice Port Configs:
===================
voice-port 1/0/0
input gain 10
output attenuation 0
timeouts call-disconnect 1
timeouts wait-release 1
connection plar opx 1006
caller-id enable
supervisory disconnect dualtone mid-call
!
voice-port 1/0/1
input gain 10
output attenuation 0
timeouts call-disconnect 1
timeouts wait-release 1
connection plar opx 1006
caller-id enable
supervisory disconnect dualtone mid-call
!
Debug Info:
================
I removed the CID # & replaced it w/ #####
Jan 14 18:45:53.378: [1/0/0] get_fxo_caller_id:Caller ID received. Message type=128 length=39 checksum=3E
.Jan 14 18:45:53.378: [1/0/0] Caller ID String 80 24 01 08 30 31 31 34 31 31 34 35 02 0A 39 30 37 38 33 30 35 36 38 31 07 0C 43 45 4C 4C 55 4C 41 52 20 4F 4E 45 3E
.Jan 14 18:45:53.382: [1/0/0] get_fxo_caller_id calling num=######### calling name=COMPANY NAME calling time=01/14 11:45
