how do i connect ccm and cme ?

[nivanak]

hello.

i have ccm and cme.

ccm has one ip phone ( number is 1000)

cme has one ip phone ( number is 2000)

i configured below.

but it does not call each other.

dial-peer voice 555 voip

destination-pattern 2000

session target ipv4: 192.168.0.1 --> cme gateway

dial-peer voice 555 voip

destination-pattern 1000

session target ipv4: 192.168.10.1 --> ccm gateway

help me.

[costephe]

HI

Have a look at this document on CCO

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide_chapter09186a00802c4a55.html#wp1001000

When Cisco CME 3.1 or later and Cisco CallManager are used in the same network, some additional configuration is necessary, as described in the following sections:

Colin