09-25-2007 11:02 PM
Hi Forums,
I tried to call a destination number but failed.
I have this message logged using the debug voice ccapi inout, I tried to search for the disconnect cause, however I cant find it. Would really appreciate if anyone can help.
Sep 26 06:05:18.204: //253129/469D3310BBED/CCAPI/ccCallSetupRequest:
: Destination Pattern=66T, Called Number=66035277000, Digit Strip=FALSE
.Sep 26 06:05:28.440: //253129/469D3310BBED/CCAPI/ccCallDisconnect:
Cause Value=16, Tag=0x0, Call Entry(Previous Disconnect Cause=0, Disconnect Cause=0)
Thanks much,
Pnigel
09-26-2007 05:54 AM
Hi, at the next url you can find the codes:
http://www.cisco.com/en/US/tech/tk1077/technologies_tech_note09186a0080094045.shtml#q931
Your code means a normal call clearing so I supposse it's not going to help you enough.
This url is very helpful because it tells you about troubleshooting a voip call.
Regards.
Hope this helps if so pls rate post
09-26-2007 07:48 AM
Dear Paul
Use the ISDN Cause Code, for CCAPI and ISDN are the same.
In this case : Cause Value=16 , 16 is Hexa and the table show :Number changed. The ISDN number used to set up the call is
not assigned to any system.
If you want, i can send to you a pdf with the table.
09-26-2007 07:55 AM
Sorry, in this case 16 is decimal value. Normal call clearing
09-26-2007 11:04 PM
Hi Christian, icabrera,
Thank you very much for your assistance. I am trying to read through the document.
Christian, I would be pleased if you can send me the ISDN cause code in PDF.
Thanks much,
Paul
10-26-2007 10:13 PM
hope this link is useful.
http://cisco.com/en/US/products/ps6441/products_command_reference_chapter09186a00804ab4b9.html
u can use "sh h323 gateway cause-codes"
regards
pranab
10-28-2007 05:16 PM
Hi Pranab,
Thank you very much for your help.
regards,
PN
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: