cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1440
Views
0
Helpful
4
Replies

How to fix sip signaling port on Cisco 5400

amigo_nevermind
Beginner
Beginner

I have setup SIP connection on Cisco5400 and I face the problem "no ringing and call failed when destination accepted a call".

I have investigated this case with my partner and I find something wrong on SIP call flow as below

Cisco 5400               Partner

58090 INVITE ->        5060

5060 <- 100 Trying     5060

5060 <- 183               5060

53493 PRACK ->       5060

My signaling port always changed when send the signaling and I want to fix SIP signaling port to solve this problem but I don't know how to fix it.

Best regards,

Songtham

4 Replies 4

Daniele Giordano
Collaborator
Collaborator

Commands are:

1. enable

2. configure terminal

3. voice service voip

4. sip

5. listen-port {non-secure | secure} port-number

Cisco uses 5060 as default.

These commands were introduced only in latest IOS versions and, if I correctly remember, are not supported from AS5400.

What IOS version is installed on your gateway?

Regards.

Hi Daniele,

My IOS is 12.3 (22)

Best regards,

Songtham

Can you upgrade the IOS to 12.4 version?

Hi Daniele,

I'll check all impacts related upgrading before do it. If I have any update I'll report on this topic again, thank you for your help

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: