Re: NM-HDV farm

smvasagam · ‎08-25-2007

Hi, I have installed 2 NM-HDV with 5 PVDM-12 to each on 3725. I wonder if this is normal (I try on all 12.4 IVS IOSes and all the same behavior):

When the 3725 boot up, it will show "changed state to up" for DSP 1-10 when I have 5 PVDMs, 4-15 when I have 4 PVDMs, 7-15 when I have 3 PVDMs.

The question is why the booting never show all 15 DSPs in the 5 PVDMs (just 1-10)? This happens to both of my NM-HDVs, so unless both NM-HDVs are defective, they should not behave the same way, or maybe my 3725 cannot handle all the DSPs there?

Anyone have the same experience?

When I have a show diag, I do see all the HDV SIMMs listed:

Slot 1:

High Density Voice Port adapter

Port adapter is analyzed

Port adapter insertion time unknown

EEPROM contents at hardware discovery:

Hardware Revision : 1.1

Top Assy. Part Number : 800-03567-01

Board Revision : G0

Deviation Number : 0-0

Fab Version : 02

PCB Serial Number : JAB05400BWQ

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Product (FRU) Number : NM-HDV=

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 00 CC 41 01 01 C0 46 03 20 00 0D EF 01

0x10: 42 47 30 80 00 00 00 00 02 02 C1 8B 4A 41 42 30

0x20: 35 34 30 30 42 57 51 03 00 81 00 00 00 00 04 00

0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

HDV SIMMs: Product (FRU) Number: PVDM-12=

SIMM slot 0: PVDM-12 SIMM present.

SIMM slot 1: PVDM-12 SIMM present.

SIMM slot 2: PVDM-12 SIMM present.

SIMM slot 3: PVDM-12 SIMM present.

SIMM slot 4: Empty.

HDV firmware: Compiled Fri 19-Nov-04 14:23 by michen

HDV memory size 524280 heap free 193977

Slot 2: