09-08-2006 12:40 AM
Hi friends,
I have this config:
class-map match-all FTP
match protocol ftp
policy-map limitFTP
class FTP
shape average 1000000
map-class frame-relay test
service-policy output limitFTP
interface serial0/0
frame-relay traffic-shaping
interface serial0/0.30
frame-relay interface-dlci XXX
class test
I HAVE THE ERROR when apply "class test"
ONLY CLASS-DEFAULT SUPPORTED OVER FR VCs
Please, How can I solve it?
Best regards
09-08-2006 05:00 AM
Hi,
you should be able to use a nested policy:
class-map match-all FTP
match protocol ftp
policy-map limitFTP
class FTP
shape average 1000000
service-policy output limitFTP
policy-map Parent
class class-default
service-policy output limitFTP
map-class frame-relay test
service-policy output Parent
interface serial0/0
frame-relay traffic-shaping
interface serial0/0.30
frame-relay interface-dlci XXX
class test
Which hardware and IOS are in use?
Hope this helps! Please rate all posts.
Regards, Martin
09-11-2006 12:36 AM
Hi, thank you for your reply.
How affect this new config to my class-map FTP and policy-map limitFTP?
Is needed the line serice-policy output in the policy-map limitFTP?
Best regards.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide