Voice over IP

Dear Friends,Please help me out for connectivity of voice. We have two Centers in a distance of 2Km. We have connected both centers with Bridges of 2Mb Backbone for data transfer.we have PBXs in both centers. In both centers we have the staff of 50 m...

Hi experts, I 'm installing 2 PGWs 9.2.2 on 2 sunfires v120 (one disk on one sun). I followed the guides on Cisco Install guide doccuments. The procedure I do : 1 - Install Sun solaris 8 2 - Install Patch CSCOh015 3 - Install MGC software 9.2.2 4 - I...

and what show command would be able to know what number they are calling ?

Interface IP-Address OK? Method Status ProtocolATM2/IMA1.41 unassigned YES unset deleted down

??

I have a 2691 Router with a VWIC-1MFT module being used to connent to my Siemens HiCom PBX, (running QSIG). Right now this can support a maximum of 30 channels between my router and the PBX. To add to this i am using VOIP-(extra info). However if i r...

I want to implement QOS for VOIP traffic between Branch Office IP phones and Headoffice PABX. Basic network diagram is as follows Nortel IP PHONES (Branch Office) | L2 ordinary Switch | Cisco 1841 | | -----MPLS WAN----- | | Cisco 1841 | Cisco ASA | C...

I got cisco 2821 with VWIC(2 E1), any sample doc to connect E1 to PABX.

Hi,I have installed MNM 3.2 (Service Pack 7.2) on a Solaris 8.0 server. I have gone through all the docs and applied all pathces recommended by Cisco. CEMF starts properly, and when I start a cemf session from a XWindow session it displays the login ...

I'm trying to define and use a custom cptone. But no matter what I do I can't seem to get it to take effect.For testing I'm basically trying to set every possible tone to the equivalent of a dial tone. As far as naming the custom cptone when I'm in ...

Hi friends, I have this config:class-map match-all FTPmatch protocol ftppolicy-map limitFTPclass FTPshape average 1000000map-class frame-relay testservice-policy output limitFTPinterface serial0/0frame-relay traffic-shapinginterface serial0/0.30frame...

hello guys,im facing a weird issue with our local telco e1/r2 connected to my as5300.all calls made from voip side to pstn.. caller side gets a fax modem tone.any suggestion?thanks,ychuan

Hi,I need to fix an translation rule for the shortnumber range 9300-9799. I need to translate them in to fully number 46-31-9... (example 46319300 and 46319779). Is it possible to do this within 1 rule insted of 7 different rules?It's the calling num...

Hello all,There is something wrong with my voip network.I have callmanager(4.1) and Voice G/W(cisco2600).When i try to make a call from IP Phone(7940) to Cellular Phone, I can't hear music bell. music bell is seviced by mobile telecommunication compa...