cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1077
Views
0
Helpful
2
Replies

Question : "Proposed status" using show isdn service

johnyoon75
Level 1
Level 1

Hello.

I have a problem with my voice gateway.(c2851 with 12.3(11)8T)

We have two isdn pri line between two pods. Pod-A have one gateway with two pri line, Pod-B have two gatway, each gateway connect just one isdn pri line.

Today, Pod-B's gateway have problem.

At that time, I tried to retrieved the status of the isdn, the output dispayed "proposed" by using show isdn service.

But i don't the mean, that is "Proposed".

Could you please tell me the status?

reagrds,

John.

gateway#sh isdn service

PRI Channel Statistics:

ISDN Se1/0:15, Channel [1-31]

Configured Isdn Interface (dsl) 0

Channel State (0=Idle 1=Proposed 2=Busy 3=Reserved 4=Restart 5=Maint_Pend)

Channel : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1

State : 1 1 1 1 1 2 2 1 1 0 0 0 1 1 0 3 1 0 1 0 1 1 0 0 1 1 1 1 1 1 1

Service State (0=Inservice 1=Maint 2=Outofservice 8=MaintPend 9=OOSPend)

Channel : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1

State : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Nov 9 11:22:57.777 KST: %ISDN-6-CHAN_UNAVAILABLE: Interface Se1/0:15 Requested Channel 1 is not available

Nov 9 11:22:57.781 KST: ISDN Se1/0:15 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x808C

Cause i = 0x82AC18 - Requested circuit/channel not available

2 Replies 2

ebreniz
Level 6
Level 6

Did you reconfigure the PRI lines or do a restart of the routers. does that resolves the issue.

Check for the bug CSCee11391in the bug tool kit. Need to upgrade to another version.

Santi Cuni
Level 1
Level 1

Hello

I have your same problem "Requested circuit/channel not available" but I can't see if there is a bug about this problem or not. Could you tell me if this problem is a bug and from which IOS this caveates is will fix? Also could you tell me please which device are interested?

Thanks in advance