voice on ip

[simangoye]

I have just bought a Cisco routeur 2600 version 12. 2(8)T4 C2600-i-mz.122-8.T4.bin and two Vics maps 2 FXOS + 1 NM - HD - 2V, I must program the voice on IP on my routeur, except that I don't have the Dial-peers commands and voice-harbor. how must I program my routeur?

[sriram.g]

Hi,

You need to have IP PLUS or IP VOICE feature set in the IOS which is the basic requirement for voice over IP then your IOS image would have a 's' in it image. You would also need DSP's to process the voice calls.Then you could configure the dialpeers for voice and pots for basic communication.

Thanks

GS