Hi guys,
I need to set up the priority of network traffic:
1. VoIP (sensitive) (Cisco and Grandstream phones)
2. RDP (medium sensitive)
3. all other internet traffic (not sensitive)
VoIP and RDP traffic go to servers through VPN tunnels.
Internet traffic is NATing on the WAN interface.
I have two ISPs:
ISP1 is connected to Gi0/0/1
ISP2 is connected to Gi0/0/2.20
Lan network is connected to Gi0/0/2.200
can you give me the correct configuration example of ACL, class-map, and policy-map?
Also, tell me on which interface need to set up policy-map (subunterface, tunnel, WAN interface)?
Router Cisco ISR4321.
Thank you for helping
