Button assignent on SPA525g

[jaydien1358]

Hello,

I'm trying to assign speed dial buttons on my SPA525g but cannot get them to actually appear on the phone. Here is my config:

ephone  15
device-security-mode none
video
mac-address 68EF.BDCC.9E04
ephone-template 16
max-calls-per-button 2
username "brianhome" password password
speed-dial 1 1 label "Intercom"
speed-dial 2 300 label "Page"
speed-dial 3 101 label "Brian"
speed-dial 4 7326745050
paging-dn 1
mtp
type 525G2
button  1c27,28

The only button that has anything on it is button one.? What am I doing wrong.?

Brian

www.jaydien.com

[vcappucc]

Hi Brian,

Did you restarted your phone,

i just copied your configuration into my UC540,

R2(config-ephone)#restart
restarting 68EF.BDCC.9AE4
R2(config-ephone)#
000180: *Nov 25 17:49:37.785: %IPPHONE-6-REG_ALARM: Name=SEP68EFBDCC9AE4  Load=7.4.5 Last=Hard+Unknown
000181: *Nov 25 17:49:37.805: %IPPHONE-6-UNREGISTER_ABNORMAL: ephone-4:SEP68EFBDCC9AE4 IP:10.2.2.18 Socket:2 DeviceType:Phone has unregistered abnormally.
000182: *Nov 25 17:49:37.805: %IPPHONE-6-REGISTER: ephone-4:SEP68EFBDCC9AE4 IP:10.2.2.18 Socket:6 DeviceType:Phone has registered.
R2(config-ephone)#do show run | b ephone  4
ephone  4
device-security-mode none
video
mac-address 68EF.BDCC.9AE4
max-calls-per-button 2
username "C525G2" password 12345
speed-dial 1 1 label "Intercom"
speed-dial 2 300 label "Page"
speed-dial 3 101 label "Brian"
speed-dial 4 7326745050
mtp
type 525G2
button  1c4,5
!

and i got this:

What firmware version you are running

this works for me on

R2(config-ephone)#do sho ephone phone | in 9AE4
SEP68EFBDCC9AE4   7.4.5                  7.4.5                  Hard+Unknown

Thank you

Victor.-

[jaydien1358]

Thanks for the response.

I have restarted the phone several times. I am currently running version 7.4.5

Best Regards,

Brian Fleishman