caller id blocking

[sohenko]

does anyone know if it is possible to block caller id on a per call  bassis on an ip phone? am using a PRI. customer wanted to use *67 but to the best of my knowledge that is not possible on a PRI trunk. Thanks in advance.

[Marcos Hernandez]

Try this:

telephony-service
caller-id block code 

—Digit string of up to 16 characters. The first character must be an
asterisk (*). 

 Here is a link from the command reference guide:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_c1ht.html#wp1017160

Marcos Hernandez
Technical Marketing Engineer
Cisco Systems, Inc.