10-09-2012 11:04 AM - edited 03-21-2019 06:24 AM
I have a UC520 with a lots of 7975 and 7970 running. I am able to create conference,
but when I want the see the conference List pressing the button I don´t get any result.
Does anyone can tell me how to look on this or make any traces?
Best Regards
Klaus
10-09-2012 11:26 AM
Which IOS and phone firmware are you using ?
10-09-2012 12:48 PM
Hi Paolo,
On UC I am running
UC520_FIMMO#sh telephony-service
CONFIG (Version=8.6)
=====================
Version 8.6
sh ver
Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 15.1(4)M4b, CIBU Special
Small Business Support: http://www.cisco.com/go/smallbizhelp
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Fri 18-May-12 15:06 by CIBU
ROM: System Bootstrap, Version 12.4(11r)XW3, RELEASE SOFTWARE (fc1)
UC520_FIMMO uptime is 2 weeks, 2 hours, 5 minutes
System returned to ROM by reload at 19:32:10 GMT+1 Tue Sep 25 2012
System restarted at 19:33:03 GMT+1 Tue Sep 25 2012
System image file is "flash:uc500-advipservicesk9-mz.151-4.M4b"
Last reload type: Normal Reload
Last reload reason: Reload Command
UC520_FIMMO#sh telephony-service
CONFIG (Version=8.6)
=====================
Version 8.6
System image file is "flash:uc500-advipservicesk9-mz.151-4.M4b"
and on the phones I am running
Modellnummer CP-7970G
Version SCCP70.8-4-2S
Modellnummer CP-7975G
Version SCCP75.8-5-4S or Version SCCP75.8-5-3S
Best regards
Klaus
10-09-2012 02:52 PM
Try 9.2.3 or similar on the phones.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide