Have a client that wantsto integrate Faxfinder to VoIP Provider vjia Linksys spa112. On inbound fax (VoIP to Faxfinder) the faxfinder answers the call, then waits for a max of 15secs to receive dtmf digits (normally the extension or DID of the recepient of the fax). Upon receiving the dtmf digits the faxfinder then starts the fax setup messages - If 15secs pass without dtmf diigits the fax setup is still completed however recipient never gets notified and the fax is received and placed in default bucket (email).
My challenge is finding a setting in the ATA that allows the transmitting of dtmf to the analog line after the line is connected. Your thoughts please.
Thank you.