08-28-2019 12:09 PM - edited 08-28-2019 12:11 PM
Hi all, i'm new in voip and cisco world. my friend present me a cp8961 and i want to configure it to work with my fritzobx 7590, but no way to solve it. I try to download tftp32 for dhcp and tftp server..but for sure i mistake something. I download the last firmare cmterm-8961.9-4-2SR4-1.k3.cop, could someone help me with the right sep.xml file to fill and the procedure to flash it in the phone? i'm a real noob in this, hope in ur help to learn and to realize the connection. if there's a guide step by step will be great. tnx all :)
Solved! Go to Solution.
09-03-2019 04:10 AM
Here is the dateTimeSetting that works for me (CISCO 8961 on firmware 9.0.x, FritzBox 7390).
Note: This config will only work for firmware version <= 9.0.x
<devicePool> <dateTimeSetting> <dateTemplate>D.M.Y</dateTemplate> <timeZone>Central Europe Standard/Daylight Time</timeZone> <ntps> <ntp> <name>192.168.178.1</name> <ntpMode>Unicast</ntpMode> </ntp> <ntp> <name>0.de.pool.ntp.org</name> <ntpMode>unicast</ntpMode> </ntp> </ntps> </dateTimeSetting> </devicePool>
Best regards
09-03-2019 07:12 AM
so no way to fix nto server in versio >9.0.x? if i fix an external nto server and not fritzbox one? now i try to set an external one or to configure my pc as ntp server and try
09-03-2019 08:28 AM
doing my trying i noted that sometimes when phone goes in stand by once off hook and try to call is impossible? that could be a port mapping problem? i allowed in fritz to open all port. Is there some part in sep file concerning this?
Another issue..when i off hook handset before to call the not a normal signal but like a long and continuous beep also is i'm able to call, is possible to have the normal sound of free line (like beep beep)?
09-03-2019 08:39 AM
I saw some scripts in german forums but there is no need for the struggle, or do you really need a feature/change that was made to newer version?
I'd just suggest to downgrade the version as I did.
09-03-2019 08:54 AM
will try:) which version do u suggest? In ur sep file do u have key to hold and resume call?mute? and off hook handset or click speaker is the same? if so could u post ur sep 4 me?
09-03-2019 09:27 AM
Some issues solved like to use handest or speaker to able to use mute button, now just wait if line is available aftware sometime:)
Btw there's anyspecific guide to understand how diaplan works well and how to create my personal one?..reading some post but not understood so well...
09-03-2019 09:45 AM
sorry for so much reply in 3d...
so like to understand how dialplan works because..if i put number then place the call is all ok.. but if i active speaker or handset call closed after typing the 1th number.. i don't need to do fast dials or most i just wanna insert 2 or 3 number to fast dial problem is how to make possible it? if i assign a numer to a key then could impossible to insert the phone number, is possible to achieve this speed dials in line or sofkeys?
09-03-2019 09:41 AM
Watch out for the userLocale and networkLocale
Get sure that the Fritz.Box name of the phone is the exactly the same as the "<line> -> <name>" field.
I use 9.0.4.
Hope that helps you and everyone who struggled as long as I did.
PS: Getting this error 'The contents of the attachment doesn't match its file type.' on my mac, that's why I have to post is as inline code, sorry.
<?xml version="1.0" encoding="UTF-8"?> <device> <fullConfig>true</fullConfig> <deviceProtocol>SIP</deviceProtocol> <sshUserId>cisco</sshUserId> <sshPassword>cisco</sshPassword> <advertiseG722Codec>1</advertiseG722Codec> <devicePool> <dateTimeSetting> <dateTemplate>D.M.Y</dateTemplate> <timeZone>Central Europe Standard/Daylight Time</timeZone> <ntps> <ntp> <name>192.168.178.1</name> <ntpMode>Unicast</ntpMode> </ntp> <ntp> <name>0.de.pool.ntp.org</name> <ntpMode>unicast</ntpMode> </ntp> </ntps> </dateTimeSetting> <callManagerGroup> <members> <member priority="0"> <callManager> <ports> <ethernetPhonePort>2000</ethernetPhonePort> <sipPort>5060</sipPort> <securedSipPort>5061</securedSipPort> </ports> <processNodeName>192.168.178.1</processNodeName> </callManager> </member> </members> </callManagerGroup> </devicePool> <commonProfile> <phonePassword></phonePassword> <backgroundImageAccess>true</backgroundImageAccess> <callLogBlfEnabled>3</callLogBlfEnabled> </commonProfile> <!-- <loadInformation>sip8961.9-0-4</loadInformation> --> <vendorConfig> <disableSpeaker>false</disableSpeaker> <disableSpeakerAndHeadset>false</disableSpeakerAndHeadset> <pcPort>0</pcPort> <settingsAccess>1</settingsAccess> <garp>0</garp> <voiceVlanAccess>0</voiceVlanAccess> <videoCapability>0</videoCapability> <autoSelectLineEnable>0</autoSelectLineEnable> <sshAccess>0</sshAccess> <sshPort>22</sshPort> <webAccess>0</webAccess> <spanToPCPort>1</spanToPCPort> <loggingDisplay>1</loggingDisplay> <loadServer></loadServer> <daysDisplayNotActive>1,2,3,4,5,6,7</daysDisplayNotActive> <displayOnTime>08:00</displayOnTime> <displayOnDuration>08:05</displayOnDuration> <displayIdleTimeout>00:01</displayIdleTimeout> <displayOnWhenIncomingCall>1</displayOnWhenIncomingCall> <daysBacklightNotActive>1,2,3,4,5,6,7</daysBacklightNotActive> <backlightIdleTimeout>00:01</backlightIdleTimeout> <g722CodecSupport>2</g722CodecSupport> </vendorConfig> <phoneServices useHTTPS="true"> <provisioning>2</provisioning> <phoneService type="1" category="0"> <name>Missed Calls</name> <url>Application:Cisco/MissedCalls</url> <vendor></vendor> <version></version> </phoneService> <phoneService type="2" category="0"> <name>Voicemail</name> <url>Application:Cisco/Voicemail</url> <vendor></vendor> <version></version> </phoneService> <phoneService type="1" category="0"> <name>Received Calls</name> <url>Application:Cisco/ReceivedCalls</url> <vendor></vendor> <version></version> </phoneService> <phoneService type="1" category="0"> <name>Placed Calls</name> <url>Application:Cisco/PlacedCalls</url> <vendor></vendor> <version></version> </phoneService> </phoneServices> <!-- <commonConfig> <usb1>1</usb1> <usb2>1</usb2> <ciscoCamera>0</ciscoCamera> <videoCapability>0</videoCapability> <usbClasses>0,1,2</usbClasses> <sdio>1</sdio> <bluetooth>1</bluetooth> <wifi>0</wifi> Nur für 9971 Modell <bluetoothProfile>0,1</bluetoothProfile> <joinAndDirectTransferPolicy>0</joinAndDirectTransferPolicy> </commonConfig> --> <deviceSecurityMode>1</deviceSecurityMode> <authenticationURL>http://192.168.178.23/ciscoauth.php</authenticationURL> <directoryURL></directoryURL> <idleURL></idleURL> <informationURL></informationURL> <messagesURL></messagesURL> <proxyServerURL></proxyServerURL> <servicesURL></servicesURL> <dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig> <dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices> <dscpForCm2Dvce>96</dscpForCm2Dvce> <transportLayerProtocol>2</transportLayerProtocol> <capfAuthMode>0</capfAuthMode> <capfList> <capf> <phonePort>3804</phonePort> </capf> </capfList> <certHash></certHash> <encrConfig>false</encrConfig> <sipProfile> <sipProxies> <backupProxy></backupProxy> <backupProxyPort></backupProxyPort> <emergencyProxy></emergencyProxy> <emergencyProxyPort></emergencyProxyPort> <outboundProxy></outboundProxy> <outboundProxyPort></outboundProxyPort> <registerWithProxy>true</registerWithProxy> </sipProxies> <sipCallFeatures> <cnfJoinEnabled>true</cnfJoinEnabled> <callForwardURI>x--serviceuri-cfwdall</callForwardURI> <callPickupURI>x-cisco-serviceuri-pickup</callPickupURI> <callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI> <callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI> <meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI> <abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI> <rfc2543Hold>false</rfc2543Hold> <callHoldRingback>1</callHoldRingback> <localCfwdEnable>true</localCfwdEnable> <semiAttendedTransfer>true</semiAttendedTransfer> <anonymousCallBlock>0</anonymousCallBlock> <callerIdBlocking>0</callerIdBlocking> <dndControl>0</dndControl> <remoteCcEnable>true</remoteCcEnable> </sipCallFeatures> <sipStack> <sipInviteRetx>6</sipInviteRetx> <sipRetx>10</sipRetx> <timerInviteExpires>180</timerInviteExpires> <timerRegisterExpires>3600</timerRegisterExpires> <timerRegisterDelta>5</timerRegisterDelta> <timerKeepAliveExpires>120</timerKeepAliveExpires> <timerSubscribeExpires>120</timerSubscribeExpires> <timerSubscribeDelta>5</timerSubscribeDelta> <timerT1>500</timerT1> <timerT2>4000</timerT2> <maxRedirects>70</maxRedirects> <remotePartyID>false</remotePartyID> <userInfo>None</userInfo> </sipStack> <autoAnswerTimer>1</autoAnswerTimer> <autoAnswerAltBehavior>false</autoAnswerAltBehavior> <autoAnswerOverride>true</autoAnswerOverride> <transferOnhookEnabled>false</transferOnhookEnabled> <enableVad>false</enableVad> <preferredCodec>g722</preferredCodec> <dtmfAvtPayload>101</dtmfAvtPayload> <dtmfDbLevel>3</dtmfDbLevel> <dtmfOutofBand>avt</dtmfOutofBand> <alwaysUsePrimeLine>false</alwaysUsePrimeLine> <alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail> <kpml>3</kpml> <natEnabled>false</natEnabled> <natAddress></natAddress> <stutterMsgWaiting>0</stutterMsgWaiting> <callStats>false</callStats> <silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts> <disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig> <startMediaPort>16384</startMediaPort> <stopMediaPort>32766</stopMediaPort> <voipControlPort>5060</voipControlPort> <!-- <voipControlPort>5080</voipControlPort> --> <dscpForAudio>184</dscpForAudio> <ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy> <dialTemplate>dialplan.xml</dialTemplate> <phoneLabel>yourlabel</phoneLabel> <sipLines> <line button="1" lineIndex="1"> <featureID>9</featureID> <featureLabel>Service Line</featureLabel> <name>ServiceLine</name> <displayName>0000 00000000</displayName> <contact>ServiceLine</contact> <proxy>USECALLMANAGER</proxy> <port>5060</port> <autoAnswer> <autoAnswerEnabled>2</autoAnswerEnabled> </autoAnswer> <callWaiting>3</callWaiting> <authName>ServiceLine</authName> <authPassword>yourpass</authPassword> <sharedLine>false</sharedLine> <messageWaitingLampPolicy>1</messageWaitingLampPolicy> <messagesNumber>**600</messagesNumber> <ringSettingIdle>4</ringSettingIdle> <ringSettingActive>5</ringSettingActive> <forwardCallInfoDisplay> <callerName>true</callerName> <callerNumber>true</callerNumber> <redirectedNumber>false</redirectedNumber> <dialedNumber>true</dialedNumber> </forwardCallInfoDisplay> </line> <line button="2" lineIndex="2"> <featureID>9</featureID> <featureLabel>Priority Line</featureLabel> <name>PriorityLine</name> <displayName>0000 00000000</displayName> <contact>PriorityLine</contact> <proxy>USECALLMANAGER</proxy> <port>5060</port> <autoAnswer> <autoAnswerEnabled>2</autoAnswerEnabled> </autoAnswer> <callWaiting>3</callWaiting> <authName>PriorityLine</authName> <authPassword>yourpass</authPassword> <sharedLine>false</sharedLine> <messageWaitingLampPolicy>1</messageWaitingLampPolicy> <messagesNumber>**600</messagesNumber> <ringSettingIdle>4</ringSettingIdle> <ringSettingActive>5</ringSettingActive> <forwardCallInfoDisplay> <callerName>true</callerName> <callerNumber>true</callerNumber> <redirectedNumber>false</redirectedNumber> <dialedNumber>true</dialedNumber> </forwardCallInfoDisplay> </line> <line button="3" lineIndex="3"> <featureID>9</featureID> <featureLabel>External Line</featureLabel> <name>ExternalLine</name> <displayName>0000 00000000</displayName> <contact>ExternalLine</contact> <proxy>USECALLMANAGER</proxy> <port>5060</port> <autoAnswer> <autoAnswerEnabled>2</autoAnswerEnabled> </autoAnswer> <callWaiting>3</callWaiting> <authName>ExternalLine</authName> <authPassword>yourpass</authPassword> <sharedLine>false</sharedLine> <messageWaitingLampPolicy>1</messageWaitingLampPolicy> <messagesNumber>**600</messagesNumber> <ringSettingIdle>4</ringSettingIdle> <ringSettingActive>5</ringSettingActive> <forwardCallInfoDisplay> <callerName>true</callerName> <callerNumber>true</callerNumber> <redirectedNumber>false</redirectedNumber> <dialedNumber>true</dialedNumber> </forwardCallInfoDisplay> </line> </sipLines> </sipProfile> <userLocale> <name>German_Germany</name> <uid>1</uid> <langCode>de</langCode> <version>11.5.1.3(1)</version> <winCharSet>UTF-8</winCharSet> </userLocale> <networkLocale>Germany</networkLocale> <networkLocaleInfo> <name>Germany</name> <uid>64</uid> <version>3.3.0.0(1)</version> </networkLocaleInfo> </device>
09-03-2019 10:09 AM
tnx a lot:) i'll try in a little.
Now wanna just understand how the solve the problem about dial number after off hook or push speaker key, when i do so i can just redial last number from call history but no type number, so when i push first key (any keu from o to 9 ) cannot continue inserting number...dunno if is a problem in dialplan or something sep
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide