12-04-2009
06:26 AM
- last edited on
03-25-2019
10:44 PM
by
ciscomoderator
How is PLAR configured on a FXS port of a UC520 with code UC520-8.0.0? I am using a Viking E-40 Series Entry analog telephone plugged into an FXS port. It is a line powered speaker phones designed to provide two-way hands free communication from an entry door. I want the E-40 to automatically ring a hunt group when it goes off hook.
Solved! Go to Solution.
12-04-2009 08:22 AM
12-04-2009 08:22 AM
https://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxsbasic.html#wp1021138
That should do it for you.
12-10-2009 09:36 PM
Thank you Steve.
Here is the final working commands I used. The hunt group was 505 and door extension was 301.
voice-port 0/0/0
timeouts ringing infinity
connection plar 505
station-id name Front Door
station-id number 301
ephone-hunt 5 sequential
pilot 505
list 201, 202, 203, 204, 208, 215, 243, 222
final 201
timeout 8, 8, 8, 8, 8, 8, 8, 8
no-reg pilot
statistics collect
description Front Door
12-02-2011 01:42 PM
How about CUCM 6.1 -I have the same e40 device
Do I do it via the new partition and CSS
Is the sation ID the Attendant DN?
I bascialy need to be able to dial into the viking e40 and press the button so it dials out.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide