ā04-11-2012 08:32 AM - edited ā03-21-2019 05:38 AM
Hi All
I have a UC560, CME version 8.1 with 20 phones, some phones are SPA504 (7.4.8a)
and others are SPA525G2 (7.4.9a)
Here it is the paging-dn config:
ephone-dn 1
number 101 no-reg primary
description IP-Paging1
name Office Page
paging ip 239.1.1.1 port 2000
The strange behavior I get is that not all phones are receiving the paging and this occur randomly between phones, sometimes one phone works fine and sometimes it doesn't.
Thanks for any help
ā04-11-2012 09:01 AM
Hi
Have you added the paginging DN to you e-phones
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmepage.html#wp1010640
Something like this
!
!
ephone 5
mac-address 0019.E72C.2050
paging-dn 1
type 7971
button 1:1 2:2
!
Regards
Alex
ā04-11-2012 12:02 PM
Hi acampbell
Yes, all the ephones have the paginig-dn 1 configured.
ā04-16-2012 09:50 AM
Hello Guys
This issue was solved by configuring the paging in multicast mode,then create a new CNF-file and finally reset all phones.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide