Hi everyone.
I'm in troubles with SPA 122/112 provisioning with TFTP/TR069.
On first step, we put a .cfg file with a default configuration with a tftp server.
After this, SPA 1X2, connects with tr069 server and, depending on the wan IP address, we want to put them an specific configuration, like vlan, voice proxy, etc.
The problem is that we don't found any TR069 command to activate vlan on wan interface and then specify vlan on this.
it should be on "Device.Ethernet.Interface"?
I attached TR069 tree downloaded by our own GenieACS server.
