I have gotten the spa112 to tftp provision using option 66
I can not get it to do ftp though
There is a youtube video the does not help
I have been through several docs and it references option 66 for tftp,ftp,http,https
and then I found another doc the only references tftp,http,https
I wireshark the network interface on my ftp server and do not see any attempted connection from the spa112
if i leave the tftp up, it grabs the spa112.cfg which sets the provisioning server to ftp
gui into the spa112 and the ftp info is there but still does not connect to the ftp server
<Profile_Rule>ftp://spa112:spa112@192.168.111.11/spa$MA.xml</Profile_Rule>
This work for tftp but not ftp
