I have a SPA3000 and I use it as a residential Switchboard (PBX). The problem I have is the Dial Plan seems to be limited to less than 1200 characters.
My Dial Plan currently has 1,017 characters with 45 replacements and works well but I need to increase it and it donĀ“t let me save the changes.
Basically what I want to do is hide the phone numbers and that the guards use it as extensions to notify visits, as you can see in my Dial Plan (<#1034,: 3985637<:@ gw0>)
I do not want to use Line 1 for Voip, I just need PSTN.
This is an example of a fairly large code but I have to setup 90 houses (90 replacing numbers as extensions):
(<#9,:>xx.<:@gw0>|<#9,:>04!|<#1034,:3985637<:@gw0>|<#1063,:3983539<:@gw0>|<#1074,:3983534<:@gw0>|<#1103,:3643508<:@gw0>|<#1114,:3233560<:@gw0>........)
Is there any way to use replacement but the call out through the PSTN without using the code <:@ gw0> to save characters.
The problem is if I do it in this way <#1074,:3983584> is driven automatically by Line 1.
What is the maximum length of the Dial Plan in Line 1 and others.
Can I divide my Dial Plan on the PSTN section.
What would you recommend
Thanks in advance