Successfully configured SPA9000 PBX with two VoIP providers setting Voice->Line 1/2 parameters. One phone set is connected to FXS 1 (or FXS 2) port and able to chose the proper VoIP provider when making outbound calls.
Issue is that once outbound call is established, SPA9000 is not responding to additional numbers dialled for called party extension number. Same issue when dialling a number where voice prompt answers the call offering selection of activities to be chosen by dialling specific number. None of the entered selection works as nothing is entered on the dial.
Located in Canada. VoIP providers: freephoneline.ca & callcentric.com
SPA9000 configuration:
Software version: 6.1.5; Hardware version: 1.0.5(a)
Voice -> SIP -> PBX Parameters -> Call Routing Rule: (<:L1>9xx. | <:L2>8xx.)
Voice -> SIP -> PBX Phone Parameters -> Phone Dial Plan: ([89],[3469]11S0 | [89],1[2-9]xxxxxxxxxS0 | [89],011xx. | [89],xx.)
Voice -> FXS 1/2 -> Dial Plan: ([89],[3469]11S0 | [89],1[2-9]xxxxxxxxxS0 | [89],011xx. | [89],xx.)
Voice -> Line 1 -> Dial Plan: (<9:>xx.)
Voice -> Line 2 -> Dial Plan: (<8:>xx.)
Voice -> Regional -> Call Progress Tones:
Dial Tone: 350@-19,440@-19;10(*/0/1+2)
Second Dial Tone: 420@-19,520@-19;10(*/0/1+2)
Outside Dial Tone: 420@-16;10(*/0/1)
Prompt Tone: 520@-19,620@-19;10(*/0/1+2)
Busy Tone: 480@-19,620@-19;10(.5/.5/1+2)
Reorder Tone: 480@-19,620@-19;10(.25/.25/1+2)
Off Hook Warning Tone: 480@-10,620@0;10(.125/.125/1+2)
Ring Back Tone: 440@-19,480@-19;*(2/4/1+2)
Confirm Tone: 600@-16;1(.25/.25/1)
SIT1 Tone: 985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)
SIT2 Tone: 914@-16,1371@-16,1777@-16;20(.274/0/1,.274/0/2,.380/0/3,0/4/0)
SIT3 Tone: 914@-16,1371@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)
SIT4 Tone: 985@-16,1371@-16,1777@-16;20(.380/0/1,.274/0/2,.380/0/3,0/4/0)
MWI Dial Tone: 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)
Cfwd Dial Tone: 350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2)
Holding Tone: 600@-19;*(.1/.1/1,.1/.1/1,.1/9.5/1)
Conference Tone: 350@-19;20(.1/.1/1,.1/9.7/1)
Secure Call Indication Tone: 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2)
Feature Invocation Tone: 350@-16;*(.1/.1/1)