11-06-2011 05:37 AM - edited 03-21-2019 04:54 AM
Hello Guys,
i would like to make configuration files for my provisionning server.
I need to compile a plain txt file to a cfg file, but i do not find the good compilator for WRTP54G. I only found for spa-2102 and WRP400 and they do not seem to work on WRTP54G.
i Made a tftp server and my provisionning profile rule field points towards the cfg file via the tftp server like this :
i use tftpd32 by jounin. I see the blocks are transfered to the WRTP54G, but as i think i used a bad compiler (WRP400 or SPA2102) spc compiler taken from cisco home, i think it won't be well interpretaed by the WRT54G.
I think this because when i tro to transfer the cfg file to the WRTP54G, no informations from the cfg file are writtent into the WRTP54G, such as sip proxy server sip info sip user codecs and so on.
My question is still the same where do i find the accurate spc compiler for WRTP54G.
Or how do i send a good cfg file to the WRTP54G.
Please help me
Best regards.
Solved! Go to Solution.
11-15-2011 03:28 PM
11-15-2011 03:28 PM
11-19-2011 08:41 AM
Thank you so much. One more Question i saw in the sample xml file, that there is no option to change the wan web access and the wan web access port, and you can't change the admin router password as well.
How is it possible ?
Best regards.
11-21-2011 09:01 AM
Unfortunately no, the spc is oriented toward voice parameters.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide