UC320 & old phones

[williamkorb]

I purchased an SPA9000, SPA400, and several SPA9xx & WIP310 phones a couple of years ago. As I continue to have problems with the SPA9000 & SPA400, I'm thinking about moving to the UC320 as a replacement.

Here's the question: do I have to junk the phones, too? They are working fine (well, at least the SPA9xx units are - I've never been happy with the WIP310s). I'm hoping they are compatible with the UC320 so that I can just replace the SPA9000 & SPA400 and continue to use my existing phones.

Thanks,

Bill

[Christopher Edgeworth]

Hi Bill,

Sorry, only the SPA500 series along with SPA 303 and 301 phones are supported in the UC320W solution.

Regards,

Chris

[williamkorb]

Chris,

Thanks for the understandable, but disappointing reply.

Is there a wireless handset that works with the UC320 if not the WIP310?

Thanks,

Bill

[Christopher Edgeworth]

Bill,

A number of partners have hooked up a DECT cordless phone to an FXS port to provide a cordless phone.  WiFi phone support is on the list as a potential future feature.

Hope this helps.

Chris