02-23-2010 05:30 AM - edited 03-21-2019 02:12 AM
Hi,
I just recieved the Items for a UC520 Project which consist's of three sites and now I'll start the configuration, so in order to make this threat helpful for every body I'll post all the steps and problems that I'm going to face during the installation. for now I have the follwing questions:
please provide the best response so every body get some good information here.
02-23-2010 12:53 PM
For question number 1, do you actually want FAC or just restrictive dialing per user? This can be done with corlist.
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a008019d649.shtml
For question number 2, you can use call threshold. Look here for more information relating to this command.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/srnd/design/guide/multcme.html#wp1071392
For question number 3, I would highly recommending having QoS outbound, but also inbound (which your provider will need to do). There are several documents on QoS.
http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoSIntro.html
Lots of good informat there, but it is also a long read.
02-27-2010 05:10 AM
Hi there ,
Thank you for the great information in the above links.
i have another question, let's say that we have a situatin where all the FXO ports are busy and 3 users are trying to make a call, can I give a proiority for a user in picking up the first line becom free ?
02-27-2010 05:25 AM
Hi,
and another point, let's say that i made a NACF (Not answered call forward) to another extension , is it possible that if the other extension did not answer this call comes back to my Voice mail (for the original extension) ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide