UC520 Behind ASA 5505 w/VPN to RVS4000

[Jesse Shumaker]

First Let me show you the physical  setup of my network.

UC520 ------ ASA5505 ------ INTERNET --------  RVS4000 -------- SPA504 IP phones

Is there a way to get the two SPA504 IP  phones from inside the RVS4000 remote office to tie into the UC520  through a VPN tunnel? So that they would appear as two other extensions  on the phones. Or must I have two public IP's and make the UC520 a firewall as well with a Public IP, and connect the remote spa504g phone over the internet?

What is the best solution for this kind of setup?

thanks

jesse

[eoncablewire]

Yes it does. Thanks

[Steven DiStefano]

Remember that MultiSite DOES NOT support SA500.  Only the SR520-T1 may sit in front of a UC 500 managed by the Multisite Manager of CCA.

The SR520-T1 or SR520-ADSL is the CCA recognized Remote Router for Teleworkers.  Some time ago, I did get an 871 ISR to work and you can probably still find that document on the community, but it is not the recommeded line.

Its a good question about what are the platforms CCA supports.

Its in the release notes:

http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_assistant/version3_0/release/notes/cca_30_relnotes_OL23762-01.html