I have configured two AA on a UC560.
1. AA-1 for calls from PSTN with 2 FXO ports.I call no. from PSTN, answer the AA-1, I choose an option of extension and the call is transferred, working ok.
AA-1
!
dial-peer voice 210 voip
description ** cue auto attendant1 number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 501
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
Boht in (CME and CUE) the dtmf setting is same "rtp-nte" or "sip-notify" working ok.
ccn subsystem sip
dtmf-relay rtp-nte
!
2. AA-2 TRK SIP calls over the LAN.I call no. from SIP TRK, answer the AA-2, I choose an option of extension but does nothing and then disconnects.
AA-2
!
dial-peer voice 220 voip
description ** cue auto attendant2 number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 502
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
Boht in (CME and CUE) the dtmf setting is same "rtp-nte" or "sip-notify" don't work.
ccn subsystem sip
dtmf-relay rtp-nte
!
Any recommendations about ?
Thks.
I have configured two AA on a UC560.
1. AA-1 for calls from PSTN with 2 FXO ports.I call no. from PSTN, answer the AA-1, I choose an option of extension and the call is transferred, working ok.
AA-1
!
dial-peer voice 210 voip
description ** cue auto attendant1 number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 501
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
Boht in (CME and CUE) the dtmf setting is same "rtp-nte" or "sip-notify" working ok.
ccn subsystem sip
dtmf-relay rtp-nte
!
2. AA-2 TRK SIP calls over the LAN.I call no. from SIP TRK, answer the AA-2, I choose an option of extension but does nothing and then disconnects.
AA-2
!
dial-peer voice 220 voip
description ** cue auto attendant2 number **
translation-profile outgoing PSTN_CallForwarding
destination-pattern 502
b2bua
session protocol sipv2
session target ipv4:10.1.10.1
voice-class sip outbound-proxy ipv4:10.1.10.1
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
Boht in (CME and CUE) the dtmf setting is same "rtp-nte" or "sip-notify" don't work.
ccn subsystem sip
dtmf-relay rtp-nte
!
Any recommendations about ?
Thks.