Voice Systems and Accessories - Small Business

The firmware update upg-spa2102-5-2-13.exe doesn't work.Error: Run-Time Check Failure #2 - Stack around the variable 'strNc' was corrupted.Solution:You have to remove (blank) the admin and user password before starting the update. Put them back after...

My office has a router and a server and have the uc540 plugged into the router. So the internet goes to the router and then from a normal switch port on the router to the wan port on the phone system. This has been fine till now because our phone sys...

Hi folks,At the moment im researching a feature one of my customers would like to have. It's like this:They're using an old Siemens PBX system at the moment. When they close the office the receptionist puts the PBX in night-mode so all incoming calls...

Hello,I would like to create a SIP Trunk for the german Telecom.I am using a UC320W with the latest Firmware 2.3.2 and the region is set to germany.The SIP setting for the german Telecom requires to set the SIP domain.Should not be a problem, but whe...

Dear Dan,How you do "blf+cp" for parking slot number ? In draytek IPPBX3510 : Parking Server Number : 777Parking Slot Range . 81 to 90When i have a call, i forward it to 777 and i receive a message from pbx with slot number like "81"In cisco spa5xx, ...

Hello, I am trying to create a SIP trunk for the german telecom.To do that i would like to create a new SIP trunk based on a general provider.In the settings for the provider I have to set the SIP Domain, but there is no related field in the web form...

Hi,I have a BE6K Solution with four virtual machines installed (two Unified Communications Manager, one Unity Connection and one IM & Presence),today is the second time that the physical machine response properly but the four virtual machines are up ...

Hi Guys,On the Cisco SPA VoIP handset range, there is an option for a 'System  Configuration User Password'. This feature allows additional security  within the GUI and also locks down some of the menus on the phones.  These phone menus can be overri...

HiAm SareeshI have 250 users and want to know licensing options for 250 users have 2 option for me on BE6000 , and want to know the deffrence on both of belowPART CODEDESCRIPTIONBE6K-ST-BDL-K9=Cisco BE6000 UCS C220M3 MD   Srv,RST 9.x SW,Hyp,UPM,VCSBE...

IP Phone localization files The IP Phone localization files provide support for languages, languages, network tones and cadences. The supported locales include Bulgarian, Chinese-Chinese, Chinese-Taiwanese, Croatian, Czech Republic, Danish, Dutch, Fi...

Dears,I am facing a problem for sending fax through FXS portwe have SIP trunk from ISP.for local nos i am able to send fax but for national nos i ma not able to send fax, i gives communication error on analog fax machine connected on FXS portsThanksE...

Hello everybodyi use zwo SPA941, SPA9000 and SPA400 for the VoiceMail. Phone are fine, but since today i can't listen the VoiceMessage. The Red-New-Message-Light on the SPA941 are on. I press the VoiceMail-Button.... i listen following information: Y...

I have a customer that is a small law firm where we have installed a UC500 about a year ago.   Since the Install,  the customer often parks incoming calls for retrieval from the SPA phones they have.   This works fine except when they try to add a pa...