02-25-2010 04:57 PM - edited 03-21-2019 02:13 AM
I am trying to install CallConnector Server and am having problems importing my ephone list from CME to the server setup wizard. please let me know what additional info you need. thanks!
02-25-2010 05:27 PM
Make Sure you have RADIUS setup and let us know what error (if any) you are having.
Bob
02-25-2010 06:33 PM
the radius server is up and running. the issue is that after i telnet to the CME and pull down the ephone and ephone-dn list it does not populate on the next screen to select what phones are UCC users. I will preface this with i am running CME 8.0 so that may be the issue.
02-25-2010 07:30 PM
Check to log files for any errors in Program Files/Cisco/Call Connector.
I wish I could be more help but I have not seen this issue; doe it look like the "polling" of the database for e-phones works?
Bob
03-08-2010 07:27 AM
Hi Jarrod,
Until I upgraded to version 8 CME all worked OK until I had to add some more phones to UCC server. Then i saw the same problem as you. I could not get a listing of the ephones come up.
I upgraded my UCC Client and server to the latest release 1.5.1. and now my server can get a listing of the registered Ephones on my systems.
Dave
03-08-2010 10:42 AM
Hi Jarrod:
You will need to upgrade to 1.5.1 or the 1.6.0 version (posting to CCO this week) for CME 8.0. The 1.6.0 version has significant server enhancements and includes a new Configuration Manager administrative utlility that replaces the Server Wizard.
Thanks
Shahryar
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide