02-08-2014 01:59 AM - edited 03-21-2019 08:04 AM
i'm new in CUCM configuration
i just want to route all incoming calls from PSTN to one DN (reception number) , my environment consisted of
1- CUCM 7.1
2- i'm going outside via VG 2921 connected to primacell
3- VG 2921 is registerd on the CUCM via MGCP
i have no problem in make calls from any DN to outside
thanks
02-17-2014 08:35 AM
Ahmed,
You just need to setup some translation patterns to make this happen. Nothing CUCC can do to help here. Needs to be done the UCM GUI.
02-18-2014 10:35 AM
here i changed all the configuration again on my VG but H323 this time and i got same action i can make call outside but can't get call from PSTN , as i mentioned before i have GSM wireless terminator instead of land line and when i read its manual i got that its port is FXS , may be the problem is i connect it to FXO port in my VG , but i'm wonder how i can make call to outside .
by the way i have other action occurred , when i call from PSTN to inside i got dial tone but no thing happen inside , and during this if i make call to outside i accidentally answer the PSTN call.
plz help and give me any example of those translation patterns i need to apply
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide