12-26-2009 03:49 PM - edited 03-21-2019 01:57 AM
We have 7911s, a 7931, a 7936, a 7921 wireless and some 7940s connected to a UC540 running IOS 12.4.
How can I make the name at the top show "first name" first? If it's not possible for all of these models that's fine.
Solved! Go to Solution.
12-30-2009 07:15 AM
This is the behavior you get if you use CCA. First name appears first.
Are you using CCA?
Steve DiStefano
Systems Engineer
US Field Channel Sales team
12-30-2009 11:14 AM
If CCA 2.2(1) doesnt let you add phones, you need to open a case. I dont see that error.
How about CLI?
ephone-dn 12 dual-line
number 203 no-reg primary
pickup-group 1
label 203
description Study Office
name Study Office <---- firstname lastname
call-forward busy 401
call-forward noan 401 timeout 10
translation-profile incoming CallBlocking
12-30-2009 07:15 AM
This is the behavior you get if you use CCA. First name appears first.
Are you using CCA?
Steve DiStefano
Systems Engineer
US Field Channel Sales team
12-30-2009 08:14 AM
Yes and no. CCA works for many things -- except for adding new phones (not sure why) so I added them with the CUE web admin. How may I set this with CUE?
12-30-2009 11:14 AM
If CCA 2.2(1) doesnt let you add phones, you need to open a case. I dont see that error.
How about CLI?
ephone-dn 12 dual-line
number 203 no-reg primary
pickup-group 1
label 203
description Study Office
name Study Office <---- firstname lastname
call-forward busy 401
call-forward noan 401 timeout 10
translation-profile incoming CallBlocking
01-08-2010 03:27 PM
Unfortunately time had already passed for me to add a case, by the time you replied :-( I was using CCA 2.1(1).
Fortunately, I was mistaken about the phones showing last name first. On re-visit to the site I saw they are as they should be.
Thanks for your help!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide