Voice Systems and Accessories - Small Business

HI Guys,Just a very quick one, I had an issues where external calls comming into my UC520 via the Skystone Software was not being dropped into the unity vmailIt took Cisco TAC a couple of days to work this out why....Apparently there were a couple of...

I wanted to know how I can create my own XML template for my sip provider?  I see several default ones and I know you can use the General one too, but I'd like to create my own and put it in the appropriate folder so that it shows up in the list as w...

I'm excited about the SPA525G phones connecting to the UC500 over SSL VPN..before I start playing around with this feature, I have some quick questions..1. Do both UC520 and UC540s support this feature? or only UC540?2. What is the limit of concurren...

I'm in the process of replacing 30-40 phones.  The old phones are 7960s and the customer has purchased 40 524s.  I need to do a replacement and looking for the easiest and quickest way to do this with out (hopefully) loosing everyones voicemail, etc.

Hi All,Wondering if anyone has seen this particular problem before i issue this to TAC:CPE:                Cisco 7970 IP handsetAppliance:         Cisco UC500 16 UserIOS:                  22YBCPE Loads:       8-5-3S (recently updated to try and comba...

Hello all,Couple of problems in setting up this phone on my home network.It will not register. When turning on the phone it will sit at "Trying to Register" eventually displaying "Not Registered".I have added ports 6050-6250 on my NAT settings on my ...

I have enabled the TimeCardView from CCA 2.0 and configured the users etc. as the video suggested. However, the TimeCardView app is not showing up on the phones. Is there any extra steps that need to be done for it to activate?

Hi All,Has anyone configured the Cisco SPA-3102 PSTN Phone Gateway with the 16 port Cisco RV016 wired router? My goal is to successfully cascade the PSTN Phone Gateway with my RV016 wired router allowing me use the Cisco SPA-3102 PSTN Phone Gateway w...

[Translated in English]Hello, I'm a Call Manager Express and my posts are being set daily vigils at 18h.My question is or change the time of that standby of the screen?Thank you in advanceBonjour,Je suis sur un call manager Express et mes postes se m...

guys,how would you implement outgoing rule that will show up your DID number when you are calling from inside?my DID list isn't in order, but the ISP is sending 4 digits and inside extension is 3. i have done the translation for incoming, but for out...

I am trying to configure SAP8800 under Asterisk environment.  Doing exactly per document "Configuring the Cisco SPA8800 Telephony Gateway in an Asterisk Environment.I am able to dial in from an outside phone to both SPA8800 analog phones as well as s...

Hi!According to these release notes (http://www.cisco.com/en/US/docs/voice_ip_comm/csbpvga/spa3102/release/notes/SPA3102_RN_V5-2.pdf) there should be a firmware 5.2 available for the SPA-3102.I can't find it on this site.  Is it available and if not,...

Hello,Id just like to know what compatability Cisco/Linksys have with hearing aids in the SPA9x2 range of IP handsets.COmpeting products websites claim "This product is hearing aid compatible and volume control is in compliance with FCC Part 68 and t...

How do you change how quickly the color screen goes blank unti someone touches the phone or a call comes in.It seems like a power save mode or something.Client would like phones to go blank in off hours.