cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.
Get the latest news in this issue of the Cisco Small Business Monthly Newsletter

608
Views
0
Helpful
5
Replies
Highlighted

Sharing Analog line via IP to UC560

I have a remote location that have an analog line that I need to be able to dial out from the UC560.

So If I am calling 911 I want my call to getout at this analog line locate in a different place.

We are sharing our UC560 in two different building and calling 911 make information show from the other building. Our phone companie can provide E911 to overcome this, but it is really costly.

I was looking for some FXS connector to share the POTS line back to my UC560.

Thank

Sylvain Duchesne

5 REPLIES 5
Highlighted
Hall of Fame Master

You can add a VIC2-2FXO card in the UC500 free slot.

Highlighted

Dear Paolo, keep in mind that this POTS is locate in a separate building only link with IP (with a WiFi bridge).

I have found this device ; http://www.voiplink.com/Zoom_5801_p/zoom-5801.htm that SHOULD be compatible with the UC560.

thank

Sylvain

Highlighted

You should look also at the FXO adapters from the Cisco small business line of products.

Highlighted

Hello PAolo, do you have a part number... the only thing I found is from Linksys division.

Thank

Sylvain

Highlighted