05-15-2013 06:18 AM - edited 03-21-2019 07:21 AM
Hi to all
Fax to email:
I am wondering with Fax to email feature if is mandatory to have
1) our own smtp server(it would not work if we set the ISP smtp right?)
2) we need a fax machine connected to FXO?(This is mandatory for only incoming calls or its not neccessary)
Email notification:
The same quenstion here we need our own smtp server or if we use the ISP smtp will be ok?
Pls advice
Regards
Chrysostomos
05-15-2013 07:15 AM
You don;t need your own SMTP server, and you don't need a fax machine.
Note, fax to email is not supported with SIP trunks.
05-15-2013 07:23 AM
Hi Paolo
Thank you for your answer
Fax to email is not supported with sip trunks?Do you have any official doc for that.We have to provide it to the customer
What about email notofication.If we use the ISP smtp is should work?
They dont have to enable email relay?
Regards
cc
05-15-2013 07:36 AM
You can search documentation. It doesn't work because with SIP trunk there is no DSP in path, so it's impossible to convert the fax.
As above, no local smtp server is needed and no special settings.
Thanks for the nice rating, and good luck!
05-16-2013 01:36 AM
Paolo
So if we use an analoque line connected directly to fxo ?(without to use the sip trunk) it will be ok right>?
05-16-2013 02:04 AM
As above, fax to email works with all types of circuits but not SIP trunk.
05-16-2013 02:19 AM
Thank you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide