03-23-2018 03:04 AM - edited 03-12-2019 05:08 AM
hi,
The 'authorize-only' command is missing from my 5505 running 9.1(7)23, on a base license:
Under
ciscoasa(config-aaa-server-group)#
there is no authorize-only command, and according to the documentationt there should be:
Any ideas appreciated.
Solved! Go to Solution.
03-23-2018 04:39 AM
03-23-2018 02:55 PM
Hi,
The "authorize-only" command was introduced with the 9.2(1) release.
Best regards,
Antonin
03-23-2018 04:39 AM
03-25-2018 02:42 AM
03-23-2018 02:55 PM
Hi,
The "authorize-only" command was introduced with the 9.2(1) release.
Best regards,
Antonin
03-25-2018 02:40 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide