I am trying to create a tunnel between my LAC and LNS (refer to attached topology). What I actually want is to forward my clients PPP requests coming onto g2/0 over to the L2TP tunnel created. Now I can create the tunnel (L2TPv2 since L2TPv3 is not supported by the LNS) but I am unable to forward PPP traffic coming onto interface g2/0.
Below is my config:
retransmit retries 10
retransmit timeout min 5
retransmit initial timeout max 4
protocol l2tpv2 test
ip local interface GigabitEthernet1/0
ip address a.a.a.a 255.255.255.248
no ip address
ip address negotiated
pseudowire 188.8.131.52 35 encapsulation l2tpv2 pw-class wire1
Hi experts,I would like any suggestions on this topology. We are is the middle of replacing our old ASA5520 with the new FirePower. Our current firewall terminate our IPsec tunnels and the GRE is terminated on the first inside router's loopback on the sec...
Hi All, A customer wants to authenticate Anyconnect VPN users from an ASA using the client installed certificate and then with AD. i.e. Is this a corporate device?Would we recommend authenticating the cert on the ASA then passing the AD check to ISE ...
Hello Team, we are getting alert in FMC stating policy deployment failed, we are running on 6.2.0 version and not sure which version is stable version to re mediate this issue, in one event i have seen restart will resolve this issue but is it perman...
Threat Hunting 101
In the latest Cisco Cybersecurity report, we explore all there is to know about threat hunting and provide a how-to guide for creating a threat hunting team.
Here are some of th...
What Is Cisco Identity Services Engine?
Cisco Identity Services Engine (ISE) is an all-in-one enterprise policy control product that enables comprehensive secure wired, wireless, and Virtual Private Networking (VPN) access.
Cisco ISE offers...