05-26-2011 01:13 PM
Hello everybody,
I would like to access my router Cisco 7301 through an analogic modem in the AUX port as backup access. I have had problem with the connection, the status of AUX port is changing (Modem state: Ready or Idle). This status is about the speedy negociation of modem to router.
I noticed that my router don´t have the command "modem auto discovery" in the line AUX.
My router is 7301 with IOS Version 12.4(25b)
The configuration of port is:
line aux 0
exec-timeout 5 0
password 7 130B0306
logging synchronous
modem InOut
transport input all
stopbits 1
The modem that i use is US Robotics 56K.
Somebody knows what command able the discovery in the AUX interface??
Tks,
Flávio Correia
Solved! Go to Solution.
05-26-2011 01:25 PM
Set router port speed to 38400, same on the modem (fixed). You should not need anything else.
05-26-2011 01:25 PM
Set router port speed to 38400, same on the modem (fixed). You should not need anything else.
06-01-2011 06:24 AM
Thank you!!
It´s worked!!
Best Regards,
Flávio Correia
06-01-2011 09:40 AM
Glad to know it did, thanks for the nice rating and good luck!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide