11-22-2010 03:49 PM
i have two 881 routers with a site to site vpn between them. I have a static nat on the office router for a webserver that is accessible from the internet. I am unable to access this webserver across the vpn. All other traffic is fine acrosss VPN. I am thinking this is an issue with NAT. Here is relevant config lines.
ip nat inside source route-map SDM_RMAP_1 interface FastEthernet4 overload
ip nat inside source static 192.168.150.2 blahblahblah route-map SDM_RMAP_1
route-map SDM_RMAP_1 permit 1
match ip address 100
access-list 100 deny ip 192.168.150.0 0.0.0.255 192.168.123.0 0.0.0.255
access-list 100 permit ip 192.168.150.0 0.0.0.255 any
Solved! Go to Solution.
11-22-2010 03:54 PM
You should be able to access the web server with its private ip address (192.168.150.2) through the VPN connection.
If you have just added the VPN and the route-map, try to clear the existing translation, and see if you can access it via its private ip address from the remote VPN LAN.
11-22-2010 03:54 PM
You should be able to access the web server with its private ip address (192.168.150.2) through the VPN connection.
If you have just added the VPN and the route-map, try to clear the existing translation, and see if you can access it via its private ip address from the remote VPN LAN.
11-23-2010 11:29 AM
You are correct. The configuration is correct. Just needed to
clear the existing NAT translations. Thanks for your help!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide