09-09-2015 02:46 PM - edited 02-21-2020 08:27 PM
Hi Guys
I have an existing anyconnect VPN setup for some users. Now we have another customer who also needs VPN access into the network.
How would I go about this in terms of separation from the existing VPN. This customer will have a different address pool. Would this invole configuring a different connection profile and group policy?
Im new to VPNs so may be asking a bbasic question.
Thanks
Solved! Go to Solution.
09-09-2015 06:18 PM
Hi Mokhalil82,
Yes, you're correct. You can only assign one IP pool per group-policy /connection profile. So if this users needs to connect to a different group. You need to create a different group-policy for this user and maybe apply a group URL or group alias to difference this new connection from the existing one.
Hope it helps
-Randy-
09-09-2015 06:18 PM
Hi Mokhalil82,
Yes, you're correct. You can only assign one IP pool per group-policy /connection profile. So if this users needs to connect to a different group. You need to create a different group-policy for this user and maybe apply a group URL or group alias to difference this new connection from the existing one.
Hope it helps
-Randy-
09-10-2015 11:06 PM
Thanks Randy
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide